CAUTION
The system may not operate
normally if any of the following
conditions should occur:
1) When the illumination from
an on-coming vehicle or a
vehicle in front is dim. Such
examples may include:
•
When the headlamps of an
oncoming vehicle or the tail
lamps of a vehicle in front is
covered with dust, snow, or
water
•
When the headlamps on an
on-coming vehicle are OFF,
but the fog lamps are ON)
2) When the High Beam Assist
camera is adversely affected
by an external condition. Such
examples may include:
•
When the vehicle's head-
lamps have been damaged or
not repaired properly
•
When the vehicle headlamps
are not aimed properly
(Continued)
(Continued)
•
When the vehicle is driven on
a narrow curved road or rough
road
•
When the vehicle is driven on
an uphill road or downhill
road
•
When only part of the vehicle
in front is visible on a cross-
road or curved road
•
When there is a traffic light,
reflecting sign, flashing sign
or mirror
•
When the road conditions are
bad such as being wet or cov-
ered with snow
•
When a vehicle suddenly
appears from a curve
•
When the vehicle is tilted from
a flat tire or being towed
•
When
the
Lane
Keeping
Assist (LKA) system warning
light illuminates
(Continued)
(Continued)
•
When the light from the
oncoming or front vehicle is
not
detected
because
exhaust fume, smoke, fog,
snow, etc.
•
When the front window is cov-
ered with foreign matters
such as ice, dust, fog, or is
damaged
3) When the forward visibility is
poor. Such examples may
include:
•
When the headlamps of an
oncoming vehicle or a vehicle
in front is not detected due to
poor outside visibility (smog,
smoke, dust, fog, heavy rain,
snow, etc.)
•
When the windshield visibility
is poor
of
3
3-85