Table of Contents
Advertisement
SPEED CONTROL SETTINGS
To control the speed, turn the knob
located on the trigger in the direction
marked.
1 = 1200 rpm
2 = 1500 rpm
3 = 1800 rpm
4 = 2100 rpm
5 = 2400 rpm
Max = 2500 rpm
LOCK ON FEATURE
For continuous sanding:
1. Squeeze the trigger and then press the LOCK ON button.
• The sander will continue to run even if the trigger is released.
2. To release the lock on feature, squeeze the trigger again.
SUCTION POWER ADJUSTMENT
1. Turn the suction power adjustment
wheel to suit, based on the
sanders speed setting
• The faster the sander speed,
the more open the suction
power adjustment wheel
should be.
EDGE/CORNER SANDING
If there is a need to sand edges or
corners of walls.
1. Press down on the release clip
2. Pull edge sanding cover away
from main sander body
This will give access to 1/4 of the
sanding disc edge for rounding
edges and corners.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
11
Advertisement
Table of Contents
