Bradford White EFR-1-60T1206EN Installation & Operating Manual page 43

To Decrease Setpoint Temperature
Step 1: Depress and hold "Temperature Down" button until desired setpoint temperature appears in the display.
Step 2: "Setpoint" indicator begins flashing in the display after pressing "Temperature Down" button.
Step 3: Press "SET" button for new setting to take effect immediately. The setpoint will stop flashing. If the "SET"
button is not pressed, the new temperature setting will take effect in approximately 10 seconds.
°F
idle
Operational
Status
SELECT SET
Step 1
setpoint
°F
idle
Operational
Status
SELECT SET
Step 2
setpoint
°F
idle
Operational
Status
SELECT SET
Step 3 Press SET for setting to
take effect immediately
43
"Setpoint"
flashes
"Setpoint" flashes
for 10 seconds