→ The TC 649 E login screen appears.
Enter admin as the user name.
Enter the default password (admin) or your own password as applicable.
Click on Log in or press the Enter key.
Set the IP address to the static address you require via Settings Network
settings – for more information, see Network settings 5.2.1.1. DHCP
static
If you still cannot access the TC 649 E device, check the proxy settings and
contact the system administrator if necessary.
Once you have changed the TC 649 E's IP address to a static address:
Move the network cable from the Service interface to the Ethernet interface.
Change your computer's network adapter to the required address.
To do this, see the steps mentioned above.
Restart the device by disconnecting it briefly from the power supply.
TC 649 E Manual
Connecting TC 649 E to the network
12