Blower Housing; Back Cover - LG DLEX5000 Series Service Manual

BLOWER HOUSING

BACK COVER

ROLLERS
1.
Remove the top plate.
2.
Remove the cabinet cover and front bulkhead.
3.
Remove the drum assembly.
4.
Remove 2 screws and cover (air guide).
5.
Remove the bolt and washer.
6.
Remove the blower wheel. (Left-hand thread).
7.
Disconnect the motor clamp and motor.
1.
Open the top plate.
2.
Remove the cover cabinet and front bulkhead.
3.
Remove the drum assembly.
4.
Remove 7 screws.
5.
Pull the rear bulkhead towards the front.
1.
Disassemble the top plate.
2.
Remove the cover cabinet and front bulkhead.
3.
Remove the drum assembly and front bulkhead.
4.
Disconnect the air duct from the front bulkhead.
5.
Remove the rollers from the front bulkhead.
and rear bulkhead.
44