Filter Assembly And Moisture Sensor; Blower Housing - LG DLE9577 Training Manual

DRYER 9577/9588

Filter Assembly and Moisture Sensor

Blower Housing

DLE9577/DLG9588
DISASSEMBLY/REPAIR
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
Page 46 of 58
Remove the filter.
Remove three screws holding
the cover grid to the drum front.
Remove the cover grid.
Remove and replace the
electrodes of the sensor.
Remove the top plate.
Remove the front cover and the
drum front.
Remove the belt and drum
assembly. Set the drum aside
on an open end so it won't be
distorted.
Remove two screws and the
cover (air guide).
Remove the bolt and washer
that secure the fan (blower) to
the shaft.
Remove the fan from the shaft
and housing.
Remove the two motor clamps
and lift out the motor. To release
the clamps, press the hook end
with a large screwdriver and lift it
off the retaining tab.
TRAINING MANUAL