Understanding the printer menus
Menu item
Enable Network Connections
Off
On*
Enable LLDP
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Wireless
Note: This menu is available only in printers connected to a Wi‑Fi network or printers that have a wireless
network adapter.
Menu item
Setup On Printer Panel
Choose Network
Add Wi‑Fi Network
Network Name
Network Mode (Infrastructure*)
Wireless Security Mode (Disabled*)
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Enable Wi‑Fi Direct
On
Off*
Compatibility
802.11b/g/n (2.4GHz)
802.11a/b/g/n/ac (2.4GHz/5GHz)*
802.11a/n/ac (5GHz)
Wireless Security Mode
Disabled*
WEP
WPA2/WPA-Personal
WPA2-Personal
802.1x - RADIUS
IPv4
Enable DHCP (On*)
Set Static IP Address
Description
Enable the printer to connect to a network.
Enable Link Layer Discovery Protocol (LLDP) in the printer.
Description
Configure the wireless connection using the control
panel.
Establish a Wi‑Fi network and enable network security.
Enable Wi-Fi Direct‑capable devices to connect to the
printer.
Specify the standard for the Wi‑Fi network.
Set the security mode for connecting the printer to Wi‑Fi
devices.
Configure the IPv4 settings.
63