Setting Up The Monitor; Attaching The Monitor Stand - HP 6ML40AA-ABU User Manual

Setting up the monitor

Attaching the monitor stand

To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation
WARNING!
setup and proper posture, health, and work habits for computer users. The Safety & Comfort Guide also provides
important electrical and mechanical safety information. The Safety & Comfort Guide is available on the Web at
http://www.hp.com/ergo.
To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the
IMPORTANT:
panel may cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will not
recover to its normal condition.
To prevent the screen from getting scratched, defaced, or broken and prevent damage to the
IMPORTANT:
control buttons, position the monitor facedown on a flat surface covered with protective sheet foam or a
nonabrasive cloth.
54 .61 cm/21 .5-inch model
1. Position the monitor head facedown on a flat surface covered by protective sheet made of foam or a clean,
dry cloth.
2. Insert stand riser (1) and base (2) into the monitor as shown above.
60 .47 cm/23 .8–inch model
The monitor uses the HP Quick Release 2 for easy mounting of the monitor. To mount the panel onto the stand:
1. Position the monitor head facedown on a flat surface covered by protective sheet made of foam or a clean,
dry cloth.
2. Unpack the base, one hand hold the monitor, the other hand to pivot the stand (1).
3. Insert the base (2) into the stand.
4. Turn the screw clockwise (3) to attach the base to the monitor.
1
2
1
3
2
1 Getting Started 5