Table of Contents
Advertisement
Burn-in image damage may occur on monitors that display the same static image on the screen for
IMPORTANT:
12 or more hours. To avoid burn-in image damage, you should always activate a screen saver application or turn
off the monitor when it will not be in use for a prolonged period of time. Image retention is a condition that may
occur on all LCD screens. Burn-in damage on the monitor is not covered under the HP warranty.
If pressing the power button has no effect, the Power Button Lockout feature may be enabled. To disable
NOTE:
this feature, press and hold the monitor power button for 10 seconds.
You can disable the power light in the OSD menu. Press the Menu button to open the OSD, and then select
NOTE:
Power, select Power LED, and then select Off.
Installing a security cable
You can secure the monitor to a fixed object with an optional cable lock available from HP.
HP watermark and image retention policy
The IPS monitor models are designed with IPS (In-Plane Switching) display technology, which provides ultra-
wide viewing angles and advanced image quality. IPS monitors are suitable for a wide variety of advanced
image quality applications. This panel technology, however, is not suitable for applications that exhibit static,
stationary, or fixed images for long periods of time without the use of screen savers. These types of applications
may include camera surveillance, video games, marketing logos, and templates. Static images may cause image
retention damage that could look like stains or watermarks on the monitor's screen.
Image retention damage on monitors that are in use 24 hours per day is not covered under the HP warranty. To
avoid image retention damage, always turn off the monitor when it is not in use or use the power management
setting, if supported on your system, to turn off the monitor when the system is idle.
or
1 Getting Started
13
Advertisement
Table of Contents
