Adjusting The Monitor - HP 6ML40AA-ABU User Manual

4. Connect the round end of the power supply cord to the monitor (1), and then connect one end of the power
cord to the power supply (2) and the other end to a grounded AC outlet (3).
To reduce the risk of electric shock or damage to the equipment:
WARNING!
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally
step on or trip over them. Do not pull on a cord or cable. When unplugging the power cord from the AC outlet,
grasp the cord by the plug.
Connector locations may vary.
NOTE:

Adjusting the monitor

To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation
WARNING!
setup and proper posture, health, and work habits for computer users. The Safety & Comfort Guide also provides
important electrical and mechanical safety information. The Safety & Comfort Guide is available on the Web at
http://www.hp.com/ergo.
1. Tilt the monitor head forward or backward to set it to a comfortable eye level.
10 1 Getting Started
or
or