Connecting The Cables - HP 6ML40AA-ABU User Manual

Table of Contents

Connecting the cables

Depending on the model, the monitor may be capable of supporting VGA, HDMI, or DisplayPort inputs.

NOTE:

The video mode is determined by the video cable used. The monitor will automatically determine which inputs

have valid video signals. To select an input, press the

Input.

The monitor ships with select cables. Not all cables shown in this section are included with the monitor.

NOTE:

1. Place the monitor in a convenient, well-ventilated location near the computer.

2. Before connecting the cables, route the cables through the cable routing hole in the center of the stand.

(Select Models)

3. Connect a video cable.

•

Connect one end of a VGA cable to the VGA connector on the rear of the monitor and the other end to the

VGA connector on the source device. (Select Models)

1 Getting Started

button to access the OSD menu and then select

Table of Contents