Rear Panel; Figure 10 Transceiver Installation Example; Figure 11 Installed Transceiver; Figure 12 Opening The Transceiver's Latch Example - ZyXEL Communications ES-3148 Series User Manual

Figure 10 Transceiver Installation Example

2 Press the transceiver firmly until it clicks into place.
3 The Switch automatically detects the installed transceiver. Check the LEDs to verify that
it is functioning properly.

Figure 11 Installed Transceiver

3.1.2.2 Transceiver Removal
Use the following steps to remove a mini GBIC transceiver (SFP module).
1 Open the transceiver's latch (latch styles vary).

Figure 12 Opening the Transceiver's Latch Example

2 Pull the transceiver out of the slot.

Figure 13 Transceiver Removal Example

3.2 Rear Panel

The following figure shows the rear panel of the Switch.
ES-3148 User's Guide
Chapter 3 Hardware Overview
45