Syslog; Chapter 32 Syslog; Syslog Overview; Syslog Setup - ZyXEL Communications ES-3148 Series User Manual

C
H A P T E R
This chapter explains the syslog screens.

32.1 Syslog Overview

The syslog protocol allows devices to send event notification messages across an IP network
to syslog servers that collect the event messages. A syslog-enabled device can generate a
syslog message and send it to a syslog server.
Syslog is defined in RFC 3164. The RFC defines the packet format, content and system log
related information of syslog messages. Each syslog message has a facility and severity level.
The syslog facility identifies a file in the syslog server. Refer to the documentation of your
syslog program for details. The following table describes the syslog severity levels.

Table 109 Syslog Severity Levels

CODE SEVERITY
0 Emergency: The system is unusable.
1 Alert: Action must be taken immediately.
2 Critical: The system condition is critical.
3 Error: There is an error condition on the system.
4 Warning: There is a warning condition on the system.
5 Notice: There is a normal but significant condition on the system.
6 Informational: The syslog contains an informational message.
7 Debug: The message is intended for debug-level purposes.

32.2 Syslog Setup

Click Management > Syslog in the navigation panel to display this screen. The syslog feature
sends logs to an external syslog server. Use this screen to configure the device's system
logging settings.
ES-3148 User's Guide
32

Syslog

265