Table of Contents
Advertisement
e-Mail setting Tab
The e-Mail setting tab is used to set the parameters to
send e-Mail when an error occurs with the camera or
motion detection.
Mail server
Enter the IP address of the mail server.
SMTP port number
Enter the port number of the mail server.
Normally use 25.
Sender e-Mail address
Enter the sender e-Mail address.
"Detection notification via e-Mail" checkbox
Select this checkbox to send e-Mail when the camera
detects a moving object.
Notification interval: Enter the interval of e-Mail
sending in minutes.
Recipient e-Mail address: Enter the recipient e-Mail
address for detection notification. To specify multiple
addresses, insert a comma between two addresses.
Note
When you use the "Detection notification via e-Mail"
feature, e-Mail is sent each time a moving object is
detected. Consequently, the recipient receives many e-
Mails frequently.
46
Configuring the System (System setting Dialog)
"Error notification via e-Mail" checkbox
Select this checkbox to send e-Mail when an error
occurs with the camera.
Recipient e-Mail address: Enter the recipient e-Mail
address for error notification. To specify multiple
addresses, insert a comma between two addresses.
Memory setting Tab
The Memory setting tab specifies the activity when the
disk capacity becomes low and the data folder to save
recordings.
When disk capacity is low
Stop recording: Recording stops.
Delete old images automatically and continue
recording: The recorded data with the oldest time is
deleted automatically and recording continues.
Data folder
Displays the folder to save recordings.
... (browse) button
Click this button to display Save As dialog, and you can
change the data folder.
"Record only when a movement is detected."
Checkbox
Select the checkbox to stop recording of the panorama
image when there are no moving objects.
Advertisement
Table of Contents
