Table of Contents
Advertisement
checkmark to turn off the priority detection area.
(Available only when Tour mode is selected)
Focus area display: Click this item to show the
checkmark to display the focus area on the image of
the panorama camera. Clear the checkmark to turn
off the focus area display. (Available only when
Focus area mode is selected)
c Tool menu
Shooting parameter set assignment: Displays the
Shooting parameter set assignment window.
(page 38)
Shooting parameter setting: Select Panorama
camera, Zoom camera or Fixed camera to
display the shooting parameter setting dialog of the
selected camera. (page 38)
Camera information: Displays the Camera
information dialog. (page 41)
System setting: Displays the System setting
dialog. (page 44)
Password change: Displays the Password change
dialog. (page 47)
d Help menu
Version: Displays the version of the Administrator
Tool program (WODs Administrator).
32
Setting Non-detection Areas
Setting Non-detection
Areas
You can set non-detection areas on the image of the
panorama camera in the main window.
The non-detection area is an area where the motion
detection does not work.
2
5
1
3
4
1
Select Tour mode or Focus area mode.
The options displayed in the area setting select box
change depending on the selected mode.
2
Select Non-detection area setting.
3
Click the
(brush) button.
4
Move the Brush width slider to set the width of the
brush between 1 and 5.
The selected brush width is displayed in the box on
the left.
5
Drag the mouse on the panorama camera image and
paint over the area in which you do not want the
motion detection to work (non-detection area).
6
When the setting of all the non-detection areas are
completed, click the Apply button.
The set non-detection areas are now valid.
Note
You cannot modify or save the non-detection area
setting if the Non-detection area display checkbox in
the Display menu is cleared.
6
Advertisement
Table of Contents
