Setting The Action Output - Action Output Menu; Execution Condition Tab; Mail Transfer Tab - Setting The E-Mail (Smtp) Function - Sony SNC-WR630 User Manual

Setting the Action
output
— Action output
Menu
Action output
When you click
menu, the Action output menu appears.
The Action output menu consists of the Execution
Condition, Mail Transfer, Alarm output, Edge
Storage and Voice alert tabs.

Execution Condition Tab

Set execute conditions for each action.
Set the action output execute conditions when the
condition created in the Event condition tab is
implemented.
Mail Transfer: Set the condition of mail transfer.
Alarm output 1: Set the condition to control alarm
output of the I/O port on the rear of the camera.
Alarm output 2: Set the condition to control alarm
output of the I/O port on the rear of the camera.
Edge Storage movie: Set the condition to record
movies using the Edge Storage function.
Edge Storage still image: Set the condition to record
still images using the Edge Storage function.
Voice alert 1: Set the condition of Voice alert 1 recorded
in the camera.
Voice alert 2: Set the condition of Voice alert 2 recorded
in the camera.
Voice alert 3: Set the condition of Voice alert 3 recorded
in the camera.
Preset call: Set the condition of preset call and the
preset call number.
Mail Transfer Tab — Setting the
e-Mail (SMTP) Function
SMTP Server
Notes
• You cannot send an audio file by using the e-mail
sending function.
• The frame rate and operability on the viewer may be
reduced while a file is being transmitted by the e-Mail
(SMTP) function.
SMTP server name
Type the SMTP server name using up to 64 characters,
or the IP address of the SMTP server.
in the Administrator
SMTP port number
Enter a port number from 25 or 1024 to 65535.
The standard port number is 25.
Authentication
Select whether authentication is required when you send
an e-mail.
None: No authentication is required when an e-mail is
sent.
SMTP: Select when SMTP authentication is required.
POP before SMTP: Select when POP before SMTP
authentication is required.
Combination of POP before SMTP and SMTP:
Select when both SMTP authentication and POP
before SMTP authentication is required.
POP mode
Select POP3 or APOP as the authentication method for
POP authentication.
Note
The model on sale in China does not support the APOP
authentication.
Wait time after POP
Set the waiting time in POP before SMTP before
SMTP authentication after POP authentication is
completed. Timeout can be set from 0 to 10,000 msec.
POP server name
This is necessary when POP before SMTP is selected
for Authentication.
Type the POP (receiving mail) server name using up to
64 characters, or type the IP address of the POP server.
This setting is necessary when the SMTP server that
sends e-mails performs authentication using the POP
user account.
POP port number
Enter a port number from 110 or 1024 to 65535.
The standard port number is 110.
Authentication mode
Select Login or CRAM-MD5 as the authentication
method for SMTP authentication.
Note
The model on sale in China does not support the CRAM-
MD5 authentication.
User name, Password
Type the user name and password of the user who owns
the mail account using up to 64 characters. This setting
Setting the Action output — Action output Menu
51