Table of Contents
Advertisement
d
(record) button
Click to start recording of live images.
e
(stop) button
Click to stop shooting.
f
(manual mode) button
Click to set the zoom camera to manual mode.
For the manual mode, see "Operating the Zoom
Camera in Manual Mode" on page 23.
g
(auto mode) button
Click to set the zoom camera to auto mode. The
zoom camera automatically tracks and shoots the
moving object detected by the panorama camera.
For the auto mode, see "Operating the Zoom
Camera in Auto Mode" on page 22.
Common buttons
The buttons identified with the same icon have the same
function on either the Live or Play Back tab.
1
a
(zoom in) button
Click to zoom in the image in the window.
b
(zoom out) button
Click to zoom out the image in the window.
c
(snapshot) button
Click to capture the image in the window as a still
image. The capture image is displayed in the still
image display window.
Buttons on the Play Back tab
The buttons on the Play Back tab control playback
images.
This section describes the functions of the buttons on the
Play back tab.
1
2 3 4 5 6 7 8
a Live button
Click to switch to the Live tab.
2
3
b Playback speed select box
Select the playback speed (×1, ×2 or ×3) from the
drop-down list.
c n (reverse playback) button
Click to start playback in reverse.
d N (playback) button
Click to start normal playback.
e x (stop) button
Click to stop playback.
f . (previous image) button
Click to move back to the point where the previous
moving object has been recorded.
g > (next image) button
Click to move forward to the point where the next
moving object has been recorded.
h
(recording and moving object history
window) button
Click to open the recording and moving object
history window.
Menu bar
1
2
a File menu
Exit the application: Exits Operator Tool.
b Display menu
Detection area display: Click on this item to show
the checkmark to display green frames at detected
moving objects on the image of the panorama
camera.
Non-detection area display: Click on this item to
show the checkmark to display non-detection areas
on the image of the panorama camera. Clear the
checkmark to turn off the non-detection areas.
Priority area display: Click on this item to show
the checkmark to display the priority detection area
on the image of the panorama camera. Clear the
checkmark to turn off the priority detection area.
(Available only when Tour mode is selected)
Focus area display: Click this item to show the
checkmark to display the focus area(s) on the image
of the panorama camera. Clear the checkmark to
3
4
Configuration of Windows
17
Advertisement
Table of Contents
