Ping - ZyXEL Communications ZyXEL Prestige P-330W User Manual

Table 37 Advanced: WAN L2PT Encapsulation
LABEL
User Name
Password
Idle Time
MTU Size
Attain DNS
Automatically
Set DNS Manually
DNS 1 - 3
Clone MAC Address
Respond to WAN Ping
Enable UPnP
IPSec Passthrough
PPTP Passthrough
L2TP Passthrough
Save
Reset

6.8 Ping

The Ping screen allows you to send out PING requests from your P-330W to a network
address you specify and then reports back the test result. You can use this command to help
diagnose network problems.
To access the Ping command, click ADVANCED then the Ping link. The screen appears as
shown.
Chapter 6 Advanced Options
DESCRIPTION
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
The amount of time before the L2TP session times out and drops connection.
Enter in the maximum MTU (packet size) here.
Select this if your ISP assigns you a DNS server at the same time it assigns
you an IP Address.
Use this if your ISP does not assign a DNSP server when it assigns you an IP
address.
Enter in your ISP's DNS server IP address here. You must enter in 1.
Your ISP may require a particular MAC address in order for you to connect to
the Internet. This MAC address is the PC's MAC address that your ISP had
originally connected your Internet connection to. Type in this Clone MAC
address in this section to replace the WAN MAC address with the MAC
address of that PC.
Put a check in this box to reply to ping packets.
UPnP (Universal Plug and Play) allows automatic discovery and configuration
of the Wireless Router. UPnP is by supported by Windows ME, XP, or later.
Put a check in this box to allow the router configuration to be changed by
UPnP devices.
Put a check in this box to enable computers on your LAN to make IPSec VPN
connections to servers on the Internet.
Put a check in this box to enable computers on your LAN to make PPTP VPN
connections to servers on the Internet.
Put a check in this box to enable computers on your LAN to make L2TP VPN
connections to servers on the Internet.
Click Save to save your changes back to the P-330W.
Click Reset to begin configuring this screen afresh.
ZyXEL P-330W User's Guide
86