L2Tp Encapsulation - ZyXEL Communications ZyXEL Prestige P-330W User Manual

Table 36 Advanced: WAN PPTP Encapsulation
LABEL
Clone MAC Address
Respond to WAN Ping
Enable UPnP
IPSec Passthrough
PPTP Passthrough
L2TP Passthrough
Save
Reset

6.7.5 L2TP Encapsulation

Layer Two Tunneling Protocol (L2TP) is a network protocol that enables secure transfer of
data from a remote client to a private server, creating a Virtual Private Network (VPN) using
TCP/IP-based networks.
The screen shown next is for L2TP encapsulation.
Chapter 6 Advanced Options
DESCRIPTION
Your ISP may require a particular MAC address in order for you to connect to
the Internet. This MAC address is the PC's MAC address that your ISP had
originally connected your Internet connection to. Type in this Clone MAC
address in this section to replace the WAN MAC address with the MAC
address of that PC.
Put a check in this box to reply to ping packets.
UPnP (Universal Plug and Play) allows automatic discovery and configuration
of the Wireless Router. UPnP is by supported by Windows ME, XP, or later.
Put a check in this box to allow the router configuration to be changed by
UPnP devices.
Put a check in this box to enable computers on your LAN to make IPSec VPN
connections to servers on the Internet.
Put a check in this box to enable computers on your LAN to make PPTP VPN
connections to servers on the Internet.
Put a check in this box to enable computers on your LAN to make L2TP VPN
connections to servers on the Internet.
Click Save to save your changes back to the P-330W.
Click Reset to begin configuring this screen afresh.
ZyXEL P-330W User's Guide
84