Verifying Your Usb Installation - ZyXEL Communications PRESTIGE 660RU Series Quick Start Manual

9. Click Finish to
complete the
installation.
Restart the computer
if prompted.
10. Windows 98 SE/Me: After the computer finishes restart, connect the square end
of the USB cable to the back of your Prestige and connect the rectangular end of
the USB 6cable to the back of your computer. A window displays briefly,
indicating that the system has found new hardware.
11. Windows 2000/XP: The login screen of the Prestige web configurator appears
automatically. Click Login to configure other features. Otherwise, close the
screen or just navigate to another web site.

Verifying Your USB Installation

The screen for Windows XP is shown here.
Check the status of the Prestige in the
Device Manager window. Click Start,
Settings, Control Panel, System,
Hardware and then click Device Manager.
(Steps may vary depending on the version of
Windows).
Verify the status of the Prestige under
Network Adapter. Check that there is no
question mark on the device icon for the
Prestige.
Prestige 660RU Series Quick Start Guide
9