Machine Description - Takeuchi TL220 Operator's Manual

MACHINE DESCRIPTION
• Front, rear, left and right
This manual refers the front, rear, left and
right of the machine as seen when sitting in
the operator's seat with the bucket visible to
the front.
• Designated operations
Use this machine primarily for the following
operations:
• Carrying
• Leveling
• Loading
•Features
• Hydrostatic drive system
FRONT
LEFT
REAR
• Roll Over
I
Falling Object Protective Structure (ROPS/FOPS), tilt-up Canopy
• Low engine noise and exhaust emissions
• Two-way auxiliary hydraulics
• Pilot-operated joystick controls
• Break-in period
RIGHT
T7A004E
When the machine is new, follow the instructions below when operating the machine for the
first 100 hours (as indicated on the hourmeter).
Using a new machine roughly without breaking it in will lead to quicker deterioration of machine
performance and may shorten the machine's service life.
• Warm up the engine and hydraulic oil sufficiently.
• Avoid heavy loads and rapid operations. Operate with a load of about 80% of the maximum
load.
• Do not start up, accelerate, change directions, or stop abruptly unless necessary.
3