If A Fuse Blows - Takeuchi TL220 Operator's Manual

TROUBLESHOOTING
If a Fuse Blows
If a light does not turn on or the electric
system does not operate, a fuse may be
blown. Inspect the fuses.
Inspecting and Replacing Fuses
AwARNING
If the fuse blows as soon as it is replaced,
there is a problem with the electric
system. Continued use may lead to fire.
Consult a Takeuchi dealer.
1. Turn the ignition key to the OFF position
and stop the engine.
2. Open the fuse box cover (1).
3. Inspect for any blown fuses.
Blown Normal
~
,
D D
E4J007
4. If a fuse is blown, replace it with a spare
fuse of the same capacity.
162
Fuse Layout and Circuits Protected
< TL220
I TL230 I TL240 >
Capacity
Protected circuit Capacity Protected circuit
1SA
Front light
30A
Lever lock,
Radio(ACC)
10A
Instrument
30A
Air conditioner
cluster (OPl)
10A
Immobilizer
20A
Reserve
(ACC) Multifunction
SA
Controller
10A
Reverse alarm
service tool
10A
Feed pump,
1SA
Rear light
Sensor
10A
Controller
1SA
Main relay
SA
Ignition switch
20A
External power
socket (OPl)
10A
Solenoid
10A
Horn, Radio
(Spare)
20A
Wiper
10A
Immobilizer
(OPl) (Spare)
< TL250 >
Capacity
Protected circuit
Capacity
Protected circuit
30A
Air conditioner,
External power
socket (OPl)
20A
Rear light
20A
Reserve
Multifunction
20A
Front light
20A
Instrument
cluster
30A
Lever lock,
10A
Safety relay,
Solenoid, Air heater
Radio(ACC) controller
10A
Rear wiper
30A
Stop solenoid
(OPl)
10A
Front wiper
20A
Horn, Radio (B)
(OPl)