General - Takeuchi TL220 Operator's Manual

MAINTENANCE
General
Maintenance Description
For long-term use of the machine under
good conditions, perform the inspection and
maintenance procedures properly and safely
as recommended in this manual.
The inspection and maintenance items are
divided according to the machine's total
operating time (inspection and maintenance
to be performed every 10 hours (walk-around
and daily inspection), every 50 hours, every
250 hours, etc.). Refer to the hour meter
to determine when it is time to perform
inspection and maintenance. Items for which
it is not possible to determine the inspection
and maintenance interval are included under
"When Required".
When operating the machine in extremely
harsh environments (with high dust levels
or high temperatures), inspection and
maintenance should be performed earlier
than the times indicated on the Maintenance
Chart.
106
Cautions on Maintenance
Do not perform inspection and maintenance
procedures not prescribed in this manual.
Have inspection and maintenance
procedures not prescribed in this manual
performed by a Takeuchi dealer.
Always keep the machine clean
• Always keep the machine clean, and
wash it before performing inspection and
maintenance.
• When washing the machine with water,
stop the engine and cover the electrical
system with plastic to protect it from water.
Exposing the electrical system to water
is dangerous and could result in short-
circuits or malfunction. Do not wash the
battery, electronic control components,
sensors, connectors or the inside of the
cab with water or steam.
Fuel, lubricant and grease
• For fuels, lubricant and grease, follow the
instructions on the "Lubricant and Fuel
Chart."
• Use pure fuels, lubricants and greases
that do not contain water, and be careful
to keep dirt out when changing or
replenishing fuel, lubricant or grease.
• Store fuels, lubricants and greases in the
prescribed places and in such a way that
no water or dirt can get in them .
Cautions on fueling
• If the fill pipe includes a strainer, do not
remove the strainer when fueling.
• After fueling, be sure to securely tighten
the cap, etc.
• Do not add more than the prescribed
amount of fuel.