Service Data - Takeuchi TL220 Operator's Manual

MAINTENANCE
Service Data
Lubricant and Fuel Chart
Use different lubricants, greases and fuels according to the temperature, referring to the chart below.
• Change the lubricant earlier than as shown in the table if it is extremely dirty or its performance
has deteriorated severely.
• Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity - do not mix different brands.
Lubricants and greases
Type by temperature
Replacement Capacity
Part Type -22 -4 14 32 50 68 86 104°F
-•Kl-'!0- 0 0 10 20 30 40°C
interval
Lit. (US. qt.)
Upper limit
TL220:7.4(7.8)
Diesel engine
After first 50
TL230:10.2(10.8)
TL240:10.2(10.8)
Engine
oil APl-CF or
SAE 10W-30
hrs.
TL250:13.2(13.9)
oil pan
higher
I
SAE 15W-40
Every 250 hrs.
System
TL220:45
(11.9 US.gal.)
TL230:58
(15.3 US.gal.)
TL240:75
(19.8 US.gal.)
Diesel engine TL250:95
Hydraulic
oilAPl-CD,
SAE 10W-30
Every 1000 hrs.
(25.1 US.gal.)
tank
SAE 10W-40
Tank
CE or CF
TL220:29
(J.7 US.gal.)
TL230:39
(10.2 US.gal.)
TL240:49
(12.8 US.gal.)
TL250:60
(15.9 US.gal.)
TL220:1 1 (11 .6)
Engine Cooling
50% coolant mixture
TL230:16.5 (17.4)
cooling water (water
30% coolant mixture Every 1000 hrs.
TL240:16.5 (17.4)
system
+
coolant)**
TL250:16.5 (17.4)
Travel
Gear oil
After first 250
TL220:1.0 (1.06)
reduction
SAE90
hrs.*
TL230:1.0 (1.06)
gear
APl-GL-4
Every 500 hrs.
TL240:1.6 (1.69)
TL250:1.6 11.69\
Working
Lithium-
Daily or every
equipment
based grease
10 hrs.
As required - -
Levers and
EP-2
When required
Pedal
NLGI No.2
108