Figure 18 Status: Packet Statistics; Table 7 Status: Packet Statistics - ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx User Manual

Chapter 2 Introducing the Web Configurator

Figure 18 Status: Packet Statistics

The following table describes the fields in this screen.

Table 7 Status: Packet Statistics

LABEL
System Monitor
System up Time
Current Date/Time
CPU Usage
Memory Usage
WAN Port Statistics
Link Status
WAN IP Address
Upstream Speed
Downstream Speed
Node-Link
Status
TxPkts
RxPkts
Errors
Tx B/s
Rx B/s
Up Time
LAN Port Statistics
Interface
Status
TxPkts
RxPkts
46
DESCRIPTION
This is the elapsed time the system has been up.
This field displays your P-660HWP-Dx's present date and time.
This field specifies the percentage of CPU utilization.
This field specifies the percentage of memory utilization.
This is the status of your WAN link.
This is the IP address of your WAN.
This is the upstream speed of your P-660HWP-Dx.
This is the downstream speed of your P-660HWP-Dx.
This field displays the remote node index number and link type. Link types are
PPPoA, ENET, RFC 1483 and PPPoE.
This field displays Down (line is down), Up (line is up or connected) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This field displays the number of error packets on this port.
This field displays the number of bytes transmitted in the last second.
This field displays the number of bytes received in the last second.
This field displays the elapsed time this port has been up.
This field displays the type of port.
This field displays Down (line is down), Up (line is up or connected) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
P-660HWP-Dx User's Guide