Table of Contents
Advertisement
Chapter 22 Diagnostic
22.2 DSL Line Diagnostic
Click Maintenance > Diagnostic > DSL Line to open the screen shown next.
Figure 175 Diagnostic: DSL Line
The following table describes the fields in this screen.
Table 134 Diagnostic: DSL Line
LABEL
ATM Status
ATM Loopback
Test
DSL Line Status
Reset ADSL
Line
Capture All Logs Click this button to display all logs generated with the DSL line.
42
DESCRIPTION
Click this button to view ATM status.
Click this button to start the ATM loopback test. Make sure you have configured at
least one PVC with proper VPIs/VCIs before you begin this test. The P-660HWP-Dx
sends an OAM F5 packet to the DSLAM/ATM switch and then returns it (loops it
back) to the P-660HWP-Dx. The ATM loopback test is useful for troubleshooting
problems with the DSLAM and ATM network.
Click this button to view the DSL port's line operating values and line bit allocation.
Click this button to reinitialize the ADSL line. The large text box above then displays
the progress and results of this operation, for example:
"Start to reset ADSL
Loading ADSL modem F/W...
Reset ADSL Line Successfully!"
P-660HWP-Dx User's Guide
Advertisement
Table of Contents
Troubleshooting
