Figure 3 Front Panel Connections; Table 1 Front Panel Ports - ZyXEL Communications ZyXEL ZyWALL IDP 10 Quick Start Manual

LABEL
WAN 10/100 Connect a firewall, switch or cable/DSL modem to this port depending on where
you deploy the ZyWALL IDP (see Figure 2).
LAN 10/100 Use a crossover Ethernet cable to connect a computer to this port or use a straight-
through Ethernet cable to connect a hub. This port is auto-negotiating (can connect
at 10 or 100Mbps).
MGMT Use a crossover Ethernet cable to connect a computer to this port in order to
manage the ZyWALL IDP using the web configurator. You can also manage the
ZyWALL IDP via the LAN or WAN port, but the MGMT port is dedicated for
management. If you manage the ZyWALL IDP via the LAN or WAN port then the
ZyWALL IDP itself may be susceptible to being compromised.
ZyWALL IDP 10 Quick Start Guide
LAN Port

Figure 3 Front Panel Connections

Table 1 Front Panel Ports

7
WAN Port
DESCRIPTION
MGMT Port