2 Hardware
2.1 Rear Panel Connections
LABEL
1.
DSL
Connect to a telephone jack using the included phone wire.
2.
LAN
Connect to a computer/external hub using an Ethernet cable.
1..4
3.
POWER
Connect to a power source using the power adaptor for your region.
After you've made the connections, connect the power adaptor to a power supply and
push in the power button to turn on the Prestige.
The PWR/SYS LED blinks while performing system testing and then turns steady on if
the testing is successful. A LAN LED turns on if a LAN port is properly connected.
Prestige 660H Series Compact Guide
Figure 1 Prestige Rear Panel Connections
Table 1 Prestige Rear Panel Description
Use only the included power adaptor.
DESCRIPTION
4