Figure 20 Adding/Editing Source and Destination Addresses
The following table describes the labels in this screen.
Table 6 Adding/Editing Source and Destination Addresses
LABEL
Address Type
Start IP
Address
End IP
Address
Subnet Mask
Prestige 660H Series Compact Guide
Do you want your rule to apply to packets with a particular (single)
IP address, a range of IP addresses (e.g., 192.168.1.10 to
192.169.1.50), a subnet or any IP address? Select an option from
the drop down list box
Enter the single IP address or the starting IP address in a range
here.
Enter the ending IP address in a range here.
Enter the subnet mask here, if applicable.
DESCRIPTION
28