Configuring Source And Destination Addresses - ZyXEL Communications Prestige 660H Series Manual

LABEL
Source Address
Destination
Address
Services
Available/
Selected
Services
Edit Available
Service
Action for
Matched
Packets
Log
Alert
Delete

5.6 Configuring Source and Destination Addresses

To add a new source or destination address, click SrcAdd or DestAdd from the
previous screen. To edit an existing source or destination address, select it from the box
and click SrcEdit or DestEdit from the previous screen. Either action displays the
following screen.
Prestige 660H Series Compact Guide
Table 5 Creating/Editing A Firewall Rule
Click SrcAdd to add a new address, SrcEdit to edit an existing one
or SrcDelete to delete one. Please see the next section for more
information on adding and editing source addresses.
Click DestAdd to add a new address, DestEdit to edit an existing
one or DestDelete to delete one. Please see the following section
on adding and editing destination addresses.
Highlight a service from the Available Services box on the left, then
click >> to add it to the Selected Services box on the right. To
remove a service, highlight it in the Selected Services box on the
right, then click <<.
Click this button to go to the list of available services.
Should packets that match this rule be blocked or forwarded? Make
your choice from the drop down list box. Note that Block means the
firewall silently discards the packet.
This field determines if a log is created for packets that match the
rule, don't match the rule, both or no log is created.
Check the Alert check box to determine that this rule generates an
alert when the rule is matched.
Click Delete to remove this rule.
DESCRIPTION
27