Chapter 4 VoIP Wizard
Figure 35 VoIP Wizard Configuration
The following table describes the labels in this screen.
Table 15 VoIP Wizard Configuration
LABEL
SIP Number
SIP Server Address
SIP Service Domain
User Name
Password
Check here to set up
SIP2 settings.
Back
Apply
Exit
5 When the SIP registration test screen displays, your ZyXEL Device attempts to register
your SIP account with your VoIP service provider. Wait until it finishes.
80
DESCRIPTION
Enter your SIP number in this field. Use the number or text that comes
before the @ symbol in a SIP account. If your SIP account is
11223344@SIPA-Account.com, your SIP number is "11223344". You can
use up to 127 ASCII characters.
Type the IP address or domain name of the SIP server in this field in
dotted decimal notation (for example 192.168.3.1). It doesn't matter
whether the SIP server is a proxy, redirect or register server. You can use
up to 95 ASCII characters.
Enter the SIP service domain name in this field (the domain name that
comes after the @ symbol in a SIP account like
Account.com). You can use up to 127 ASCII Extended set characters.
This is the username you use to login to your SIP account and to register
this SIP account with the SIP register server. Type the user name exactly
as it was given to you. You can use up to 95 ASCII characters.
Type the password associated with the user name above. You can use up
to 95 ASCII Extended set characters.
This screen configures SIP account 1. Select the check box if you have
a second SIP account that you want to use. You will need to configure
the same fields for the second SIP account.
Note: If you configure more than one SIP account, you need
to configure Analog Phone settings to distinguish
between the two accounts when you make and
receive phone calls.
Click Back to return to the previous screen.
Click Apply to complete the wizard setup and save your configuration.
Click Exit to close the wizard without saving your settings.
11223344@SIPA-
P-2602HWLNI User's Guide