ZyXEL Communications P-2602HWLNI User Manual page 421

P-2602hwlni series 802.11g wireless adsl2+ 4-port voip iad
Table of Contents

Advertisement

Table 182 Diagnostic: DSL Line (continued)
LABEL
DSL Line Status
Reset ADSL
Line
Capture All Logs Click this button to display information and statistics about your ZyXEL Device's
P-2602HWLNI User's Guide
DESCRIPTION
Click this button to view statistics about the DSL connections.
noise margin downstream is the signal to noise ratio for the downstream part of
the connection (coming into the ZyXEL Device from the ISP). It is measured in
decibels. The higher the number the more signal and less noise there is.
output power upstream is the amount of power (in decibels) that the ZyXEL
Device is using to transmit to the ISP.
attenuation downstream is the reduction in amplitude (in decibels) of the DSL
signal coming into the ZyXEL Device from the ISP.
Discrete Multi-Tone (DMT) modulation divides up a line's bandwidth into sub-
carriers (sub-channels) of 4.3125 KHz each called tones. The rest of the display is
the line's bit allocation. This is displayed as the number (in hexadecimal format) of
bits transmitted for each tone. This can be used to determine the quality of the
connection, whether a given sub-carrier loop has sufficient margins to support
certain ADSL transmission rates, and possibly to determine whether particular
specific types of interference or line attenuation exist. Refer to the ITU-T G.992.1
recommendation for more information on DMT.
The better (or shorter) the line, the higher the number of bits transmitted for a DMT
tone. The maximum number of bits that can be transmitted per DMT tone is 15.
There will be some tones without any bits as there has to be space between the
upstream and downstream channels.
Click this button to reinitialize the ADSL line. The large text box above then displays
the progress and results of this operation, for example:
"Start to reset ADSL
Loading ADSL modem F/W...
Reset ADSL Line Successfully!"
ATM statistics, DSL connection statistics, DHCP settings, firmware version, WAN
and gateway IP address, VPI/VCI and LAN IP address.
Chapter 30 Diagnostic
421

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-2602hwlni-d3aP-2602hwlni-d7a

Table of Contents