ZyXEL Communications P-2602HWLNI User Manual page 48

Chapter 1 Introducing the ZyXEL Device
To activate OTIST in order to assign your wireless security settings to wireless clients,
press the RESET button for five seconds and release it. The WLAN LED should flash
while the device uses OTIST to send wireless settings to OTIST clients.("W" models
only)
To set the device back to the factory default settings, press the RESET button for ten
seconds or until the POWER LED begins to blink and then release it. When the
POWER LED begins to blink, the defaults have been restored and the device restarts.
48
P-2602HWLNI User's Guide