Appendices; Dect Cables - Avaya DECT Installation Manual

Appendices

DECT Cables

DCU to PC Programming Cable
DCU to Modem Programming Cable
DCU to INDeX Integration Cable
DECT - Installation Manual
38HBKD0001SAH – Issue 14 (27th October 2003)
Note: This cable is also used for IP Office Integration.
DECT to Modem Cable
DCU
9-Way D-Type Female
When using a modem connection, both modem should use the settings
below:
– Baudrate: 19.2K.
– Data: 8 bits.
– Parity: None.
– Stop Bits: 1.
The remote modem (connected to the DCU) must be set to Auto-Answer
(AT S0=1), inhibit results codes to the DTE (AT Q1). The local modem
(connected to the PC) must be set to DSR active (AT &S0).
For IP Office Integration, use the DCU to PC Programming cable
(see above).
Note: To maintain the INDeX system's CE and EMC approvals, only
the Avaya supplied cable should be used
(38YCND00001SAC – 2 metres).
INDeX DECT Integration Cable
DCU
Link
9-Way D-Type Female
Link
9 22
8 5
7 4
25-Way D-Type Male
6 6
5 7
4 20
3 2
2 3
1 8
8 –
7 –
9-Way D-Type Male
6 –
5 5
4 –
3 3
2 2
1 –
Appendices - Page 69
Modem
INDeX
DECT Cables
Page 69