Empire Comfort Systems EBL74 Owner's Manual page 16

Operation
→ Changed by repeatedly press-
ing the corresponding button
on the remote or the unit.
• Cycles through the different
preset ambient lighting settings
of the unit, this includes differ-
ent combinations of colours
of the flame base and media
lighting.
! NOTE: The last theme of the
cycle is a prism where the unit
cycles through a variety of co-
lours. Pressing the
stops the cycling and holds the
unit on the preferred color, in-
dicated by a "U" - Unfreeze or
a "F" - Freeze on the display.
G. Brightness
Changes the brightness of the
lights in the unit.
→ Adjusted by repeatedly press-
ing the corresponding button
on the remote.
• Indicated by the second
digit on the Floating Display™
changing to show: "H" (high),
and "L" (low).
H. Sleep Timer
The Sleep Timer can be set to
automatically shut off the fireplace
after a preset time (from 30 min-
utes to 8 hours).
16
→ To set the timer press the timer
button on the remote, repeat-
edly, until the desired time is
displayed.
• The Floating Display
display the different times as it
is adjusted. Once the timer has
begun, pressing the
will display the time remaining
before the unit turns Off.
! NOTE: The Sleep Timer can
button
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
whole unit off and it will not come
back on without being reset. It
can be reset by turning the unit off
at the main disconnect panel and
waiting 5 minutes before turning
the unit back on.
be cancelled at any time by
pressing the
peatedly until the sleep timer
displays nothing.
CAUTION: If you need to
continuously reset the heater,
disconnect power and contact
your dealer.
www.empirecomfort.com
will
TM
button
button re-