Empire Comfort Systems EBL74 Owner's Manual page 11

Fireplace Installation
the screw (predrill if required).
5. Secure the wall bracket to the
wall using the supplied 1½ in.
(3.8 cm) mounting screws and
washers into the wall and/or
wall anchors.
6. Install the bottom support brack-
et to the wall centered with the
wall mounting bracket, using the
appropriate mounting hardware,
13 ¾" (350 mm) below the wall
mounting bracket. (Figure 5)
7. Remove the center screw from
the bottom of the fireplace.
(Figure 6)
8. Hang the fireplace from the
bracket.
9. Install the removed screw
through the bottom support
bracket into the fireplace.
10. Refer to Front Glass Installation
section final installation proce-
dures.
Figure 5
Figure 6
11