Wwvb Atomic Time Signal - La Crosse Technology 308-1412-3TX Faqs

Hide thumbs Also See for 308-1412-3TX:

Manual (12 pages)

Table of Contents

• 12H/24H

• Hour

• Minutes

• Year

• Month

• Date

• Temperature Fahrenheit/Celsius

To begin:

1. Hold the SET button 3 seconds to select atomic time ON/OFF. ATOMIC ON will show.

ON flashes.

2. Press +/HI or -/LO button if you do not want Atomic Time signal (OFF).

Note: if ATOMIC is set to OFF; Skip DST, and Time Zone settings and go directly to

12/24 hour Format.

3. Press SET to confirm and move to the Daylight Saving Indicator. DST ON will show. ON

flashes.

4. Press +/HI or -/LO button to turn DST OFF if you do not observe Daylight Saving Time

changes.

5. Press SET to confirm and move to the Time Zone. EASTERN will flash.

6. Press +/HI or -/LO button to select your time zone.

7. Press SET to confirm and move to 12/24 hour time format. FORMAT will show. 12Hr

flashes.

8. Press +/HI or -/LO button to turn select 24 hour time format.

9. Press SET to confirm and move to the hour. SET HOUR will show. The hour flashes.

10. Press +/HI or -/LO button to choose the hour.

11. Press SET to confirm and move to the minutes. The MINUTES will show. Minutes flash.

12. Press +/HI or -/LO button to choose the minutes.

13. Press SET to confirm and move to the year. The SET YEAR will show. 2017 will flash.

14. Press +/HI or -/LO button to change the year.

15. Press SET to confirm and move to the month. The MONTH will show. Month will flash.

16. Press +/HI or -/LO button to change the month.

17. Press SET to confirm and move to the date. SET DATE will show. Date will flash.

18. Press +/HI or -/LO button to change the date.

19. Press SET to confirm and move to the temperature unit. TEMP °F will show. ̊ F will flash.

20. Press +/HI or -/LO button if you prefer °C (Celsius).

21. Press SET to confirm and exit.

• Once batteries are installed, your station will automatically search for the atomic time

signal for 5 minutes. Your station will search again at UTC 7:00, 8:00, 9:00, 10:00, and

11:00.

• If there is no WWVB reception, your station will search for the atomic time signal every

2 hours until the WWVB time is received.

• The atomic time signal icon will flash while searching. The tower icon will be solid

when it has connected.

• After reception, this station will only search for the atomic signal after midnight.

La Crosse Technology, Ltd.