Table of Contents
Advertisement
• Consider what is in the signal path between your station and your sensors.
• Consider the distance your station is from other electronics in the home.
Resistance:
• Obstacles such as walls, windows, stucco, concrete, and large metal objects can
reduce the range.
• When considering the distance between your sensor and your station (300 feet, 91
meters open air) cut that distance in half for each wall, window, tree, bush or other
obstruction in the signal path.
• Closer is better.
• Do not mount your sensors on a metal fence. This significantly reduces the effective
range.
Interference:
• Consider items in the signal path between your sensors and your station.
• Simple relocation of your sensors or your station may correct an interference issue.
• Windows can reflect the radio signal.
• Metal will absorb the RF (radio frequency) signal.
• Stucco held to the wall by a metal mesh will cause interference.
• Transmitting antennas from: ham radios, emergency dispatch centers, airports, military
bases, etc. may cause interference.
• Electrical wires, utilities, cables, etc. may create interference if too close.
• Vegetation is full of moisture and reduces signal.
• Dirt: Receiving a signal through a hill is difficult.
• Time display: 12-hour or 24-hour format.
• Default is 12-hour time.
• Use the Program Menu to switch time formats.
2-AA Alkaline batteries power your station.
1. Hold the SET button 2 seconds to enter settings mode.
2. Press the +/HI or -/LO button to adjust the flashing values.
3. Hold the +/HI or -/LO buttons to adjust quickly.
4. Press the SET button to confirm adjustments and move to the next item.
5. Press the SEARCH button at any time to exit.
Settings order:
• Atomic ON/OFF
• DST ON/OFF
• Time Zone
La Crosse Technology, Ltd.
WEATHER STATION
12-HOUR OR 24-HOUR TIME FORMAT
POWER REQUIREMENTS
MANUALLY SET TIME: PROGRAM MENU
Page 6
Advertisement
Table of Contents
