Wwvb Atomic Time Signal - La Crosse Technology 327-1417V2 Faqs

pressing a button. Confirm with the SET button and move to atomic time
(ATOMIC ON/OFF).
2. ATOMIC and the word ON will flash. Press and release the + or - button to turn
this to OFF if you do not wish Atomic time reception. Confirm with the SET
button and move to time zone.
Note: If OFF is selected, you will skip #3 & #4 and move next to 12/24 hour
time format.
3. EST will flash. Press and release the + or - button to select a different Time Zone:
AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain, PST= Pacific, AKT=
Alaska, HAT=Hawaiian time zone. Confirm with the SET button and move to
DST.
4. DST will flash and the word ON. Press and release the + or - button to turn this to
OFF if you do not observe DST. Confirm with the SET button and move to the
12/24 hour time.
5. 12HR will flash. Press and release the + or - button to select the correct hour.
Confirm with the SET button and move to the hour
6. The hour will flash. Press and release the + or - button to select the correct hour.
Confirm with the SET button and move to the minutes.
7. The minutes will flash. Press and release the + or - button to adjust the minutes.
Confirm with the SET button and move to the year.
8. The year will flash. Press and release the + or - button to select the correct year.
Confirm with the SET button and move to the month.
9. The month will flash. Press and release the + or - button to select the correct
month. Confirm with the SET button and move to the date.
10.The date will flash. Press and release the + or - button to select the correct date.
Confirm with the SET button and move to F/C.
Note: The Day of the Week will set automatically when the year, month and date
are set.
11.°F will flash. Press and release the + or - button to select Fahrenheit or Celsius.
Confirm SET button and select MPH or KMH for wind speed.
12.MPH will flash. Press and release the + or - button to select MPH or KMH wind
speed units.
Press the SET button to confirm and exit.
• The station will search for the atomic time signal at UTC 7:00, 8:00, 9:00,
10:00 and 11:00.
•
Press and release the SET button to search manually for atomic time signal.
•
For information about WWVB visit:
•
For best signal reception, follow these steps:
1. Check for a Tower Icon showing on the display near the time. The tower icon
indicates successful reception of the WWVB signal in the past 24-hours.
2. Check that the station is in the correct Time Zone.
3. This station offers seven time zones listed in letter format (default is EST):
• AST Atlantic Time
• EST Eastern Time
• CST Central Time
MST Mountain Time
•
La Crosse Technology, Ltd.

WWVB ATOMIC TIME SIGNAL

http://bit.ly/AtomicTime
Page 11