IVT CS-200T Manual page 9

Circular saw / table saw
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
about the safety equipment to use. Accident
prevention is dependent upon the awareness,
common sense, forethought, and proper training
of everyone involved in the operation, transport,
maintenance, and storage of the machine.
Never leave the machine unattended.
Never allow children to use the appliance.
Children should be supervised to ensure that they
do not play with the appliance.
Keep children and pets away. All onlookers
should be kept at a safe distance away from the
appliance when it is in use. Stop using the machine
while people, especially children, or pets are
nearby.
The user is responsible for third parties while
working with the appliance.
People who aren't acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this appliance,
and people under the influence of alcohol, drugs or
medication are not allowed to use the appliance.
Local regulations may restrict the age of the
operator.
WARNING: The consumption of alcohol,
medication and drugs, plus states of
illness, fever and fatigue will affect your
ability to react. Do not use electric tools in any of
these situations.
Make sure that all the protective devices are
fitted and in good condition.
Never operate the appliance with defective
safety devices or guards, or without safety devices
in place.
Inspect the entire machine for loose parts (nuts,
bolts, screws, etc.) and any damage. Check bolts at
frequent intervals for proper tightness to be sure
the equipments is in safe working condition. Repair
or replace as necessary before using the machine.
Serious injury to the operator and to the bystanders
could results if there's a damage to the machine.
Ensure that you have a good a stand, while you
operate with the device. Keep proper footing and
balance at all times.
Do not start the device if it is in an inverted
position or is not in working position.
Always switch off the appliance, disconnect
the plug and wait until the device stops whenever
you leave the machine; before carrying out
maintenance, before checking, cleaning or working
on the appliance.
Use caution when cleaning or performing
maintenance on the appliance. Always make
adjustments with the unit is switched off and it's
resting on a flat, clear surface.
Keep work area clean. Cluttered areas and
benches invite injuries.
It is forbidden to move or modify any of the
electrical and mechanical safety devices.
Do not force the tool. It will do a better job and
operate more safety at the rate for which it was
intended.
Only work in daylight or sufficiently good
artificial light. Never operate the device without
good visibility or light.
While operating the appliance, dress properly,
do not wear loose clothing or jewelry that could
become caught by the moving parts of the unit.
Wear suitable working clothes, long trousers and
solid shoes. It is recommended that legs and feet
be covered to protect from flying debris during
the operation. Do not operate the appliance when
barefoot or wearing open sandals. Long hair should
be tied back.
Use safety glasses. Also use a dust mask during
pulverulent operations and wear ear protection. If
the noise level exceeds 85 dB(A), ear protection is
obligatory. Indicated noise levels may be exceeded
dependent on the working environment and the
material to be treated.
WARNING: Use personal protective
equipment!The safety device and the
personal protective equipment protect
your own health and the health of others and
ensure trouble-free operation of the device.
Before use, all foreign bodies must be removed
from the area where the appliance is to be used:
remove all foreign objects, also pay attention to
foreign objects during the operation.
If the appliance strikes a foreign body, examine
the device for signs of damage and carry out any
necessary repairs before restarting and continuing
to work.
If the appliance should start to vibrate
abnormally, switch off the motor and check for the
cause immediately. Vibration is generally a warning
of trouble.
The appliance should be checked carefully
before use. You should only work with an appliance
that is in good condition. If you notice any defects
on the machine that may cause danger to the
operator, do not operate the appliance until defects
are rectified.
Replace worn or damaged parts for safety. Use
only original spare parts. Parts not produced by
manufacturer may cause poor fit and possible
injury.
9
Manual instruction
EN

Advertisement

Table of Contents
loading

Table of Contents