Tool Specification - IVT CS-200T Manual

Manual instruction
tools
Symbols
EN

Tool specification

Voltage / Frequency [V/Hz]
Rated power [W]
No-load speed [RPM]
Blade diameter 0 [mm]
Bore 0 of saw blade[mm]
Cutting depth 90° [mm]
Cutting depth 45° [mm]
Thickness of the saw blade [mm]
Weight [Kg]
Sound pressure [dB]A
Sound power [dB]A
Safety class
Safety regulation for the use
General safety rules
The circular table saw (CS-200T) is intended for
making straight and curved cutting lines in wood.
You can use it as an hand-held tool or table-mounted
tool by turning and secure it.
The following listed safety instructions should serve
you for the right use and for the protection of your
own safety. Therefore please read this very carefully.
When passing this device to a third person, these
instructions must be handed out, too.
Retain this user manual and all other literature
supplied with your device for any future reference.
7
model
9
Comply with the safety information and the warning
on the appliance.
Be familiar with the controls and the proper use of
the appliance before attempting to operate it and
above all, make sure you know how to stop it in case
of emergency.
Following these simple instructions will also
maintain your device in good working order.
• The appliance must be assembled correctly
before use.
• Only use the appliance for its designed
purposes.
• In addition to the design of the device there are
safety decals that must be considered and indications
8
10 11
CS-200 T
230 /50
1800
5500
200
25,4 / 32
68
45
2,5
8
81
92
II