Technical Specifications; Technical Specifications Of The Cp - Siemens SIMATIC S7-400 CP 440 Installation And Parameter Assignment

Technical Specifications

A.1

Technical Specifications of the CP 440

General technical data
The following table contains the general technical specifications of the CP 440.
You will find further general technical specifications of the SIMATIC S7-400 in the
and M7-400 Programmable Controllers, Module Specifications
Technical Specifications"
Specifications
● Electronic compatibility
● Shipping and storage conditions
● Mechanical and climatic environmental conditions
● Information on insulation testing, safety class and degrees of protection
● Certification
Technical Specifications
Dimensions W x H x D
Weight
Current consumption from the backplane bus
Power loss
Display elements
Diagnostic functions
• Indicators for internal and external faults
Diagnostic information dump
•
Supplied protocol drivers
Transmission rates with 3964(R) protocol
Transmission rates with ASCII driver
Point-to-point connection CP 440 Installation and Parameter Assignment
Manual, 09/2007, A5E00057742-03
www.gkbpx.com
S7-400 and M7-400 Programmable Controllers, Module
, and the
manual.
reference manual,
29 x 290 x 210 mm
0,3 kg
Max. 0.36 A at 5 V, typically 0.33 A at 5 V
Max. 1.9 W, typically 1.7 W
LEDs for transmitting (TXD), receiving (RXD)
and interface fault (FAULT) Group alarm LEDs
for internal fault (INTF) and external fault
(EXTF)
• Yes, 2 red LEDs
Yes
•
ASCII driver
•
3964(R) Procedure
•
300, 600, 1200, 2400, 4800, 9600, 19200,
38400, 57600, 76800, 115200 bps
300, 600, 1200, 2400, 4800, 9600, 19200,
38400, 57600, 76800, 115200 bps
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
A
S7-400
"General
137