Components, Electrical Cables; Remove Control Unit Connector; Remove Connector Protective Sleeve - Volvo 240 1989 Service Manual

Checks
Fuel system LH2.4 - 240
Components, electrical cables
C..,tllo r codf!
SII _ Urm:k U'
!:
Bl'o \\ JI
r; N -
{;ri'£ n
Gl{
-=
Grey Y
=- \
0.:1
low OR - Or;H1l!e
\\ ;: W hitt: P
-=
Pink \. 0
~
Q " ltt
R =- Red 131.
=
Brut Cl ! -= Copper
E1
Remove panels under instrument panel right side
and in front of right firewall side.
Remove glove compartment.
Check co ntrol un it ground connections
They should make good contact and fit tightly .
E2
Turn off Ignition
Remove control unit connector
Important ! Ignition must be off before remov­
ing or installing the connector.
Press up catch and fold out connector.
E3
Remove connector protective sleeve
Important!
Never check connections from the front.
Experience has shown that they can be
damaged and any faults made worse .
Check connections through the holes on
the connector side. Don 't use unneces ­
sary strength.
The connection numbers are printed on
the connector side.
38