Kia Cerato Owner's Manual page 62

Safety features of your vehicle
Bolt (5/16"-22 mm)
Spring washer
Child restraint hook holder
Child restraint hook holder
spacer
Set washer
The anchor fitting package consists of:
• Bolt: 5/16 inch - 18 UNC 22 mm
thread length
• Spring washer
• Child restraint hook holder
• Spacer : 2 mm thickness
• Set washer
• Anchor fitting: Conforms to ADR
34/02
3 44
To Child Restraint
Child restraint
hook holder
Front of Vehicle
OTF050050R
WARNING
Child restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted
child restraints. Under no cir-
cumstances are they to be used
for adult seat belts, harnesses, or
for attaching other items or
equipment to the vehicle.
WARNING
Package Trim
A child can be seriously injured
or killed in a collision if the
child restraint is not properly
anchored to the car and the
child is not properly restrained
in the child restraint. Always fol-
low the child seat manufactur-
Bolt : 22 mm (thread)
er's instructions for installation
and use.
OTF050050R-1
WARNING -
- Australian
design rule
Never mount more than one
child restraint to a single tether
or to a single lower anchorage
point.
caused by multiple seats may
cause the tethers or anchorage
points to break, causing serious
injury or death.
Tether strap
The increased load