Kia Cerato Owner's Manual page 602

Maintenance
■ 4 Door, 5 Door
■ 2 Door
Turn signal lamp
Follow steps 1 to 4 from previous page.
5. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
7 80
6. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
7. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
8. Install the socket in the assembly
OYD076085L
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
9. Reinstall the lamp assembly to the
body of the vehicle.
OYDDMC2028
Front fog lamp (if equipped)
■ 4 Door, 5 Door
■ 2 Door
1. Disconnect the negative battery
cable.
2. Remove the screws under the
front bumper.
3. Disconnect the power connector
from the socket.
OYD076012L
OYD076029