Kia Cerato Owner's Manual page 59

Hide thumbs Also See for Cerato:
Table of Contents

Advertisement

If you need to tighten the belt, pull
the webbing toward the retractor.
When you unbuckle the seat belt and
allow it to retract, the retractor will
automatically revert back to its nor-
mal seated passenger emergency
locking usage condition.
Installing a child restraint system
with a lap belt (on the centre rear
seat) (if equipped) - Except Europe
To install a child restraint system on
the centre rear seats, do the following:
1. Place the child restraint system on
the centre rear seat.
2. Extend the latch plate tongue of
the lap belt.
3. Route the lap belt through the
restraint according to the restraint
manufacturer's instructions.
Safety features of your vehicle
4. Buckle the seat belt and adjust the
lap belt for a snug hold on the child
restraint by pulling on the loose
end of the belt. After installation of
the child restraint system, try to
move it in all directions to be sure
the child restraint system is
securely installed.
1GHA2260/H
3 41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents