Table of Contents
Advertisement
Feature
2
High performance
Compact yet high performance
General-purpose magnetic flux
vector control
General-purpose magnetic flux vector control and auto
tuning functions are available.
These functions ensure the applications that require high
starting torque, such as washing machines, agitators, and
transfer machines including conveyors, hoists, and elevators.
• High torque of 150% / 1 Hz is realized (when the slip
compensation function is valid).
• Auto tuning
With our "non-rotation" auto tuning function the motor
constant (R1) can be automatically calculated.
Feature
3
Easy to use
Easy-to-read operation panel
Operation panel FR-LU08
An optional LCD operation panel
(FR-LU08) is also available.
Enclosure surface operation panel FR-PA07
The operation panel enables inverter
operation and monitoring of frequency
setting from the enclosure surface.
The operation panel cannot be removed from the inverter. The separate parameter unit connection cable (FR-CB20[]) is required.
Shorter startup time with easy setup
Inverter setup software
FR Configurator2
The software is easy to use and has unity as Mitsubishi
Electric FA products with MELSOFT common design and
good operability.
Free trial version, which contains start-up functions, is
available. It can be downloaded at Mitsubishi Electric FA
Global Website.
FR Configurator2
Personal computer
Option
Option
To connect the FR-LU08, the operation panel connection connector (FR-ADP) is also required.
Option
Brake unit connection
Brake unit can be connected
using terminal P/+ and terminal
N/-. It is useful for applications
require regenerative braking
torque during deceleration,
such as transfer machines and
food machines.
When using the inverter with the brake unit, use the FR-CS84-050-60 or higher capacity inverter.
Optimum excitation control
The excitation current is constantly adjusted to its optimum
value to drive the motor most efficiently. With a small load
torque, a substantial energy saving can be achieved.
Parameter unit FR-PU07
The parameter unit features helpful settings
such as direct input with ten-key pad,
operating status display, and help function.
Eight languages are supported.
Parameter settings for up to three units can
be saved.
Supporting high-speed communication
RS-485 communication
Using a controller, the inverter can be controlled and
monitored via network. The standard model with an RS-485
interface (Mitsubishi inverter protocol, MODBUS RTU protocol)
enables communication with the speed of up to 115.2 kbps.
Conventional model
38.4 kbps
CS80
115.2 kbps
Easy-to-follow display improves the operability
Easy connection with GOT
When the automatic connection is
enabled, the inverter can commu-
nicate with the GOT2000 series
simply by connecting the GOT.
Features
Option
Brake resistor
FR-BR
CS80
P/+
PR
PR
P/+
P/+
N/-
N/-
Brake unit
FR-BU2
Option
RS-485
communication
1
5
Hide quick links:
Advertisement
Table of Contents
