Basic Operation - Mitsubishi Electric FREQROL-CS80 Manual

 Basic operation
Output frequency monitor
(At power-ON)
Fault history
External operation mode (At power-ON )
Pressing the
MODE key while in
the "P. 0" screen
returns to the
monitor screen.
Parameter setting mode
Calibration parameter
∗1
The monitor item can be changed.
∗2
For fault history details, refer to the Instruction Manual of the FR-CS80 inverters.
∗3
When there is no fault history, "0" is displayed.
∗4
For the details of operation modes, refer to the Instruction Manual.
∗5
"P. 0" will appear if the MODE key is pressed during parameter setting.
Output current monitor
(Example)
Blinking
Fault history 1
PU Jog operation mode
Pressing the SET key while in any of the screens
above will change to the parameter setting screen.
Change the setting.
Parameter clear
Group parameter setting
Output voltage monitor
(Example)
Blinking
Fault history 2
PU operation mode
Display the
present setting
(Example)
Parameter write complete
All parameter
clear
Initial value change list
(Example)
Blinking
Fault history 8
6
Alternating
Fault history clear
17