Handling The Equipment; List Of Spare Parts - Kettler SKYLON 3 Manual

GB
The fastening material required for each assembly step is
■
shown in the diagram inset. Use the fastening material exact-
ly as instructed.
Bolt all the parts together loosely at first, and check that they
■
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check

Handling the equipment

Before using the equipment for exercise, check carefully to en-
■
sure that it has been correctly assembled.
It is not recommended to use or store the apparatus in a damp
■
room as this may cause it to rust. Please ensure that no part
of the machine comes in contact with liquids (drinks, perspi-
ration etc.). This may cause corrosion.
The machine is designed for use by adults and children should
■
not be allowed to play with it. Children at play behave un-
predictably and dangerous situations may occur for which the
manufacturer cannot be held liable. If, in spite of this, children
are allowed to use the equipment, ensure that they are in-
structed in its proper use and supervised accordingly.
The equipment is dependent of revolutions per minute.
■
A slight production of noise at the bearing of the centrifugal
■
mass is due to the construction and has no negative effect
upon operation. Possibly occurring noise during reverse pe-
dalling result from engineering and are absolutely safe.
The training device has a magnetic brake system.
■
To operate correctly, the pulse function requires a minimum
■
List of spare parts page 51-54
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see handling).
Example order: Art. no. 07654-650 / spare-part no. 94318691
/ 2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (in-
ternal) packaging, which is safe for transportation, in the original
box if possible.
It is important to provide a detailed defect description / damage
report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material".
that all screw connections have been tightened firmly. Attenti-
on: once locknuts have been unscrewed they no longer functi-
on correctly (the locking device is destroyed), and must be re-
placed.
For technical reasons, we reserve the right to carry out preli-
■
minary assembly work (e.g. addition of tubing plugs).
voltage of 2,7 volts (only for computers working with batte-
ries).
Before beginning your first training session, familiarize your-
■
self thoroughly with all the functions and settings of the unit.
Care and Maintenance
Damaged components may endanger your safety or reduce
■
the lifetime of the equipment. For this reason, worn or dama-
ged parts should be replaced immediately and the equipment
taken out of use until this has been done. Use only original
KETTLER spare parts.
To ensure that the safety level is kept to the highest possible
■
standard, determined by its construction, this product should
be serviced regulary (once a year) by specialist retailers.
Use for your regular cleaning, maintenance and care our ap-
■
pliance maintenance set (Article no. 07921-000) specifically
licensed for KETTLER Sports apparatus and available from the
Sport specialized trade.
Please ensure that liquids or perspiration never enter the ma-
■
chine or the electronics.
Waste Disposal
KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).
KETTLER GB Ltd.
GB
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+44 1527 591901
+44 1527 62423
e-mail: sales@kettler.co.uk
+1 888 253 8853
+1 888 222 9333
e-mail: sales@kettler.co.uk
5