Philips 37PF9631D/37 Service Manual page 11

4.3.8 Small Signal Board (SSB)
1
1 1
Figure 4-12 SSB bottom shielding
1. Remove the connector fixation screws [1] at the connector
plate (bottom side, see Figure "SSB bottom shielding").
2. Unplug the LVDS connector [1] on the SSB (SSB top side,
see Figure "SSB top view"). Be careful as it is very fragile.
3. Unplug all other cables on the SSB.
4. Remove the mounting screws [2] that hold the SSB, and lift
the panel from the set.
Figure 4-13 SSB top view
4.3.9 AmbiLight Inverter Panel
The AmbiLight inverter panels are placed on the inside of the
rear cover. See figure "AmbiLight inverter panels" for details.
LEFT LEFT
Figure 4-14 AmbiLight inverter panels
Left AmbiLight Panel Removal
See figure "Left AmbiLight panel removal" for details.
Mechanical Instructions
1 1
1
G_16290_072.eps
310106
1
2
G_15940_055.eps
240506
REAR COVER REAR COVER
RIGHT RIGHT
G_15940_056.eps
240506
EJ2.0U LA
2
Figure 4-15 Left AmbiLight panel removal
1. Unplug connectors [1].
2. Remove screws [2].
3. Remove panel.
Right AmbiLight Panel Removal
See figure "Right AmbiLight panel removal" for details.
2
Figure 4-16 Right AmbiLight panel removal
1. Unplug connectors [1].
2. Remove screws [2].
3. Remove panel.
4.3.10 LCD Panel
See figure "LCD panel removal" for details.
4. EN 11
1
2
G_15940_057.eps
260506
1
2
G_15940_058.eps
260506